I = P / VNo power factor needed for DC circuits.
AC Efficiency Tool
Power Factor Calculator
Estimate power factor by comparing real power in watts with apparent power in volt-amperes.
Conversion direction
Quick voltage presets
Power factor varies by load. Use the equipment value when available.
Calculated result1000 W · 120 V · DC
8.333 A
Formula used
I = P / VCustom voltage is always supported.
Formulas Used
I = P / (V × PF)Single-phase AC — multiply voltage by power factor.
I = P / (√3 × V × PF)Three-phase AC — divide by √3 ≈ 1.732.
For single-phase AC, PF = P / (V x I). For balanced three-phase AC, PF = P / (sqrt(3) x V x I).
For single-phase AC, PF = P / (V x I). For balanced three-phase AC, PF = P / (sqrt(3) x V x I).
Power factor examples
Power factor examples. Use the displayed calculator for a numerical result and check the equipment voltage and power factor before applying it.
Frequently Asked Questions
Which formula should I use?
For single-phase AC, PF = P / (V x I). For balanced three-phase AC, PF = P / (sqrt(3) x V x I).
Can I use this result for equipment sizing?
Use the result as an estimate and verify equipment specifications, code requirements, and manufacturer data before sizing electrical equipment.